needs 2 devices ( one device for each compressor )

You are free to use your Aircon however you like without no effects .

The AMI V1 has no effects on the compressor or any other parts due to it has 3 minute’s delay to protect the compressor from frequency ON/OFF .

The warranty covers defect in workmanship and materials (subject to normal storage, handling and installation conditions) .

It’s need about 30-60 minutes with qualified engineer .

No, The AMI V1 is adding an additional stage to the Aircon stages .

You will get (time, date, supply air temperature, return air temperature, compressor running time with 10 seconds interval and error log file .

If the aircon working for 24/7 its need 182.5 MB only a year .

The SD Card must format on FAT32 only .

In the collected data you have compressor running hours and from that you can calculate estimated saving between saving and bypass mode .

The standard saving mode is collecting data from supply air temperature sensor and compressor status only to calculate the best time to switch on/off the compressor, consider the aircon is on lowest set point .

The smart saving mode is collecting data from supply air temperature, return air temperature and compressor status to know the setpoint temperature to calculate the best time to switch on/off the compressor .

No need any maintenance .

We will offer software update if available and collect the data from the SD card to prepare a report for each Aircon separately where it’s will show you the exact (Room Temperature, Supply temperature and compressor running time on daily, weekly and monthly basis) .

No, the device is coming without SD card and the client should supply it or we can supply it with an extra cost .